
Licensed for it
Aluminum Fabrication
South Coast Iron fabricates aluminum from Placentia, California, including structural aluminum. On top of our LA City Fabricators license for structural steel we carry approval for stainless and aluminum, which most fabricators in this area do not. We cut aluminum up to 1.5 inches on the sheet laser and weld, finish and install it ourselves.
- Metal Fabrication
- Structural Steel
- Custom Fabrication
- Access & Safety Systems
- Silos & Hoppers
- Laser Cutting
At a glance
Specifications
| Sheet thickness | Up to 1.5 in on the 20 kW laser |
|---|---|
| Tube and section | 0.75 in to 14 in square, 6 kW tube laser |
| Structural approval | LA City FB03230, covering aluminum and stainless |
| Contractor license | CSLB 1054898 |
| Finishes | Mill, anodized, painted |
| Turnaround | Same day, or one to two days on cut parts |
What we cover
- Sheet aluminum cut up to 1.5 in thick
- Tube and extrusion cut on the 6 kW tube laser
- Structural aluminum under LA City approval
- Industrial stairs, platforms, ladders and railings
- Mill finish, anodized or painted

The license is the part worth checking
Anyone can weld aluminum. Fewer shops are approved to fabricate structural aluminum for work that has to satisfy a plan checker, and that distinction tends to surface late, usually when a submittal comes back.
We hold the LA City Fabricators license, FB03230, with approval covering stainless and aluminum alongside structural steel, and we are CSLB licensed at 1054898. Those are numbers you can look up rather than claims you have to take on trust. If your project has an approval requirement, ask us early and we will tell you plainly whether we cover it.

Aluminum is less forgiving than it looks
Aluminum conducts heat away from the weld pool faster than steel does, so it needs more heat input and a different sequence. It also moves more as it cools. An aluminum stair stringer that was cut a little loose and forced into position at the bench will hold its stress and release it somewhere less convenient later.
The fix is accuracy before heat rather than correction after it. Our tube laser cuts the copes, holes and weld prep into the section before anything is tacked, so parts locate rather than being persuaded.

Where aluminum earns its cost
Water treatment is the clearest case. Aluminum stairs, walkways and handrail do not rust, which matters enormously in a plant where galvanized steel has to be recoated on a schedule and nobody has budget for it.
The other case is weight. A rooftop platform or a long span walkway in aluminum can cut the structural support it needs underneath. That saving is often larger than the premium on the material, and it is worth modeling before defaulting to steel.
Before you call
Questions we get asked
Not answered here? The fastest route is a phone call to the shop.

Got a drawing? Talk to the shop.
Call and we will talk it through, or send the scope and drawing set and we will get back to you with pricing and a schedule.
