
Capacity
Laser Cutting Services in Orange County
South Coast Iron runs both a 20 kW sheet laser and a 6 kW tube laser from Placentia, inside Orange County. On tube capacity we take sections up to 14 inches square with a 40 foot infeed, which is larger than either of the laser shops most people in this county compare us against.
- Metal Fabrication
- Structural Steel
- Custom Fabrication
- Access & Safety Systems
- Silos & Hoppers
- Laser Cutting
At a glance
Specifications
Competitor figures read from their own published specification pages, 29 September 2026. Ours are from our founder, Sean Michael, 15 October 2026.
| Round tube | ¾ in to 14 inWe leadSerra Laser: Up to 8 inPrecision Tube Laser: Up to 6.25 in OD |
|---|---|
| Sheet laser | 20 kW, 74 in × 168 in, to 1½ in thickWe leadNeither publishes a sheet laser: tube only |
| Infeed | 40 ft, with 24 ft outfeedWe lead |
| Turnaround | Same day, or one to two daysWe lead |
| Shop | 761 Monroe Way, Placentia, CA 92870 |
What we cover
- Anaheim, Irvine, Santa Ana, Fullerton, Brea and Yorba Linda
- Huntington Beach, Newport Beach and Costa Mesa
- Orange, Tustin, Garden Grove and Buena Park

Where we sit against the other laser shops
Two names come up when people shop tube laser work around here. Serra Laser, down in Anaheim, and Precision Tube Laser, which is actually in Las Vegas and competes on national rather than local work.
On published capacity we are larger than both. These figures are theirs, taken from their own specification pages, alongside ours.

Both machines, one building, one drive
Capacity is only half of it. The other half is that an assembly needing flat parts and profile parts gets both from the same shop, nested from the same model, welded by the people who cut them. Split across two suppliers that becomes two lead times and a fit-up problem that belongs to nobody.
And the shop is in the county. From Placentia we are thirty to forty minutes from most of Orange County, which matters on the day something needs looking at rather than discussing.
Placentia, California
From the shop


Before you call
Questions we get asked
Not answered here? The fastest route is a phone call to the shop.

Got a drawing? Talk to the shop.
Call and we will talk it through, or send the scope and drawing set and we will get back to you with pricing and a schedule.
