Skip to Content
A decorative metal gate fabricated by South Coast Iron.

What we specialize in

Architectural Metal Fabrication

Architectural metals are the core of what South Coast Iron does. We fabricate polished stainless, aluminum, copper, bronze and carbon steel into doors, canopies, stairs, curtain walls, screen walls and gates, with laser cutting and metal polishing both in house in Placentia.

  • Metal Fabrication
  • Structural Steel
  • Custom Fabrication
  • Access & Safety Systems
  • Silos & Hoppers
  • Laser Cutting

At a glance

Specifications

MaterialsStainless, aluminum, copper, bronze, brass, carbon steel
FinishingIn-house polishing systems
Cutting20 kW sheet laser and 6 kW tube laser, both on site
Sheet thicknessUp to 1½ in carbon, stainless and aluminum
DetailingIn house, SolidWorks
LicensesCSLB 1054898, LA City Fabricators FB03230

What we cover

  • Polished, brushed and satin stainless
  • Aluminum, copper, bronze and brass
  • Canopies, screen walls, curtain wall components and gates
  • Doors, frames and architectural trim
  • Feature stairs and the railings that go on them
A decorative scrollwork metal panel set into a wall.

Most shops have this the other way round

Nearly every fabricator you will call in Orange County is a structural steel shop that also takes on some stainless and some architectural work when it comes up. We are the reverse. Architectural metal is the work we are built around, and we happen to do structural steel as well.

The difference shows up in the finish. Structural work is judged on whether it is straight, plumb and strong. Architectural work is judged on all of that and then on how it looks from three feet away in good light, which is a different discipline and a different set of habits.

A black metal table with a laser-cut decorative pattern.

Polishing in house is the part that matters

A polished stainless handrail or a bronze panel is made or ruined at the finishing stage, and a shop without its own polishing system has to send that work out. It comes back when it comes back, and any blemish means it goes out again. We polish in house, which is why we will quote the finishes other shops decline.

Laser-cut decorative metal furniture fabricated in Placentia.

Local, and licensed for it

The shop is at 761 Monroe Way in Placentia, in north Orange County. Architects and contractors are welcome to come and look at a sample or a mock-up in person before committing to a finish.

We hold California contractor license 1054898 and LA City Fabricators license FB03230, including the approval for stainless and aluminum.

Before you call

Questions we get asked

Not answered here? The fastest route is a phone call to the shop.

Got a drawing? Talk to the shop.

Call and we will talk it through, or send the scope and drawing set and we will get back to you with pricing and a schedule.