Skip to Content
The front of the South Coast Iron shop from the street.

We fit what we build

Stair Fabrication and Installation

South Coast Iron fabricates and installs steel, stainless and aluminum stairs from Placentia, California. We install across Southern California and travel nationwide on larger packages, which means one company is responsible for whether the stair fits.

  • Metal Fabrication
  • Structural Steel
  • Custom Fabrication
  • Access & Safety Systems
  • Silos & Hoppers
  • Laser Cutting

At a glance

Specifications

TypesIndustrial, egress, feature, grand, spiral, switchback
MaterialsCarbon steel, stainless, aluminum, galvanized
Field measurementTrimble X9 LiDAR, typically 20 minutes
Proven accuracy40 ft stair installed within 0.03 in
InstallationSouthern California, nationwide on larger packages
LicensesCSLB 1054898, LA City FB03230

What we cover

  • Industrial, egress, feature and grand stairs
  • Steel, stainless, aluminum and galvanized
  • Site scanned before detailing
  • Installed across Southern California
  • Nationwide installation on larger packages
A South Coast Iron delivery truck loaded outside the shop.

Supply only moves the risk to you

When a stair is fabricated by one company and installed by another, the gap between them is where problems live. A dimension that was taken a little optimistically, an opening that moved during construction, a landing that is a half inch out. Both parties can be entirely reasonable and the stair still does not fit, and the argument about why costs more than the stair.

We fabricate and install, so that gap does not exist. If something does not fit, it is ours to make right, and we knew that when we measured.

A steel beam marked up for cutting, mill markings still visible.

We measure with a scanner, not a tape

The old way of dimensioning a stair opening meant three or four trips back to the site, and still left room for a missed dimension or a forgotten offset. We use a Trimble X9 LiDAR scanner instead, capturing the opening as a point cloud in as little as twenty minutes, and the detailer works from that model.

The first time we did it was a stair for a local hotel. We took tape measurements alongside because we were nervous, and found the tapes could not keep up. The installed stair, forty feet of it, landed within 0.03 inches of where it was supposed to be. That is less than a thousandth of an inch per foot.

A fabricator cutting steel at the bench, sparks arcing away from the blade.

Tell us the date before the detail

Stairs are usually on the critical path, because very little else can be finished around an opening that has no stair in it. The most useful thing you can tell us at the first conversation is the installation date.

We would rather say a date is tight and plan for it than agree to it and disappoint you. Laser cut parts run same day or in one to two days, which gives us more room than most shops have, but the honest conversation still has to happen first.

Before you call

Questions we get asked

Not answered here? The fastest route is a phone call to the shop.

Got a drawing? Talk to the shop.

Call and we will talk it through, or send the scope and drawing set and we will get back to you with pricing and a schedule.