Skip to Content
The tube laser mid-cut behind its guard, sparks spraying from the chuck.

Two machines, one shop

Laser Cutting in Orange County

South Coast Iron runs a 20 kW flat sheet laser and a 6 kW tube and profile laser in the same building in Placentia. Between them they cut up to 1½ inch plate and tube from ¾ inch round to 14 inch square, in carbon steel, stainless, aluminum, copper, brass and bronze, with same day to two day turnaround.

  • Metal Fabrication
  • Structural Steel
  • Custom Fabrication
  • Access & Safety Systems
  • Silos & Hoppers
  • Laser Cutting

At a glance

Specifications

Figures supplied by Sean Michael, 15 October 2026.

Sheet laserXOVR X-Series, 20 kW fiber
Sheet table74 in × 168 in, dual shuttle tables
Sheet thicknessUp to 1½ in carbon, stainless and aluminum
Sheet tolerance±0.0050 in
Tube laserXOVR X-Series RailBLAZER Pro, 6 kW with bevel head
Tube rails40 ft infeed, 24 ft outfeed, auto feed, two-chuck
Tube size range¾ in round minimum to 14 in × 14 in square maximum
Tube wall thickness¾ in carbon, ½ in stainless and aluminum
Tube toleranceApproximately ±0.0010 in
Profiles cutSquare, rectangular, round, pipe, channel, W beam, angle, WT
TurnaroundSame day, or one to two days

What we cover

  • Same day, or one to two day, turnaround on cut parts
  • Carbon steel, stainless, aluminum, copper, brass and bronze
  • Bevel cutting and weld prep on the tube laser
  • Flat and profile parts nested from one model
The laser cutting a steel plate, sparks pouring off the cut line.

Why both machines in one building matters

Most assemblies need flat parts and profile parts. A stair needs stringers cut from plate and tube for the railing. A hopper needs a developed cone from sheet and structural sections cut and coped. A platform needs decking, brackets and posts.

Where those come from two suppliers you get two lead times, two sets of tolerances and a fit-up problem that belongs to nobody. Here they come off two machines in the same shop, programmed from the same model, and are welded together by the people who cut them.

A hand holding a laser-cut tube showing the bevelled end and cut hole.

Detailed and programmed in house

Nesting and programming are done here in SolidWorks rather than sent out. That is what makes a same day turnaround possible at all, and it means a drawing that will not work gets caught by somebody who can pick up the phone rather than returned a day later.

Placentia, California

From the shop

Laser-cut stainless steel tube sections stacked on a pallet.
A steel plate loaded on the cutting bed of South Coast Iron's fiber sheet laser.
Laser-cut steel gussets laid out after cutting.

Before you call

Questions we get asked

Not answered here? The fastest route is a phone call to the shop.

Got a drawing? Talk to the shop.

Call and we will talk it through, or send the scope and drawing set and we will get back to you with pricing and a schedule.