Skip to Content
A fabricated metal gate and fence.

Clean lines, correct tension

Cable Railing Fabrication

South Coast Iron fabricates and installs cable railing in stainless steel and aluminum from Placentia, California. Posts are cut on our tube laser so the cable holes are placed to the thousandth rather than drilled by hand, which is what keeps a long run looking straight.

  • Metal Fabrication
  • Structural Steel
  • Custom Fabrication
  • Access & Safety Systems
  • Silos & Hoppers
  • Laser Cutting

At a glance

Specifications

MaterialsStainless steel, aluminum
Post fabrication6 kW tube laser, holes cut to program
Tolerance on cut partsApproximately plus or minus 0.0010 in
InfillTensioned stainless cable, concealed or exposed hardware
FinishesSatin, brushed, mirror, powder coat, anodized
InstallationAvailable across Southern California

What we cover

  • Stainless and aluminum posts and top rail
  • Post holes cut on the tube laser, not hand drilled
  • Tensioned stainless cable with concealed or exposed hardware
  • Interior, exterior, stair and level runs
  • Fabrication and installation across Southern California
Metal railing along a timber boardwalk over water.

Cable rail is a drilling problem

A cable railing is visually simple and that is exactly what makes it unforgiving. Every post has to carry its holes at the same height, square to the run and in line with every other post. A hole that is a sixteenth low on one post shows as a sagging cable across the whole balcony, and no amount of tensioning hides it.

Drilled by hand, post by post, that accuracy is achievable and slow. Cut on a tube laser it is simply a property of the part. The holes are in the program, so the twentieth post is identical to the first.

A fabricator welding a rail section in the yard.

Tension, deflection and code

Cable railing has to resist a spreading load between posts without the cables deflecting more than the code allows. That is a function of post spacing, cable diameter and tension, and it is the part of a cable rail that most often fails inspection.

The usual cause is post spacing chosen for appearance and then intermediate supports added late to rescue it. Get the spacing right at drawing stage and the finished rail looks better as well as passing.

A welder tacking a long assembly beside the roller door.

Where cable rail is the right answer

Cable rail earns its place where a view is the point. Decks, stairs, mezzanines and balconies where a picket or glass infill would interrupt the thing people are there to look at.

Where it is the wrong answer is in heavy industrial settings with impact risk, or anywhere small children are a primary consideration and the governing code pushes you toward a different infill. We will say so if that is your situation rather than sell you the job.

Before you call

Questions we get asked

Not answered here? The fastest route is a phone call to the shop.

Got a drawing? Talk to the shop.

Call and we will talk it through, or send the scope and drawing set and we will get back to you with pricing and a schedule.