Skip to Content
An ornate bronze railing with a polished ball finial and cast scroll infill.

Rarely offered locally

Copper, Brass and Bronze Fabrication

South Coast Iron cuts and fabricates copper, brass and bronze on both lasers at our Placentia, California shop, and polishes them in house. Very few fabricators in Southern California take this work at all, which is usually why people find us for it.

  • Metal Fabrication
  • Structural Steel
  • Custom Fabrication
  • Access & Safety Systems
  • Silos & Hoppers
  • Laser Cutting

At a glance

Specifications

MaterialsCopper, brass, bronze
Sheet cutting20 kW laser, 74 in x 168 in table
Tube and section6 kW tube laser, 0.75 in to 14 in square
FinishingPolished, brushed and prepared for patina, in house
Typical workArchitectural, restoration, display and signage
DetailingIn house, SolidWorks

What we cover

  • Copper, brass and bronze on both lasers
  • Architectural railings, handrail and trim
  • Letters, panels, screens and decorative infill
  • Restoration and matching of existing work
  • Polishing, brushing and patina preparation in house
The X-Series RailBLAZER tube laser cutting a section, sparks falling.

Why so few shops take this work

Copper and brass reflect laser light, which is exactly what you do not want pointed back into an expensive machine. Older laser sources genuinely could not cut them safely, and a lot of shops still decline the work on that basis without having revisited it.

The machines moved on. Ours cut all three, and the practical limits now are thickness and finish rather than whether the material can be processed at all. The result is that a job most fabricators turn away is routine here.

Decorative scrollwork railing panel.

The finish is the whole job

Nobody specifies bronze for its structural properties. It is chosen because of how it looks, and that means every decision in fabrication is really a decision about appearance. Weld placement, heat input, how a joint is dressed, whether a seam is visible from the approach, all of it matters more than it would in steel.

We polish in house, which is the only reason this is practical. A shop that welds bronze and then ships it out for finishing has handed the most important part of the job to someone who was not in the room when it was built.

A fabricated part clamped in a jig on the assembly bench.

Bring us the drawing early

Work in these materials is usually driven by an architect or a designer rather than a contractor, and the detail that causes trouble is almost always a joint that was drawn without a thought for how it would be welded or how the finish would carry across it.

We would rather look at the drawing before it is issued than after it is approved. That conversation costs nothing and it routinely saves a revision.

Before you call

Questions we get asked

Not answered here? The fastest route is a phone call to the shop.

Got a drawing? Talk to the shop.

Call and we will talk it through, or send the scope and drawing set and we will get back to you with pricing and a schedule.