
The leader in Southern California
Metal Fabrication and Laser Cutting for San Diego County
South Coast Iron is the leader in Southern California for laser-cut steel and architectural metal, and we work across San Diego County. Our 20 kW sheet laser cuts plate up to 1½ inches thick and our tube laser takes sections up to 14 inches square, which is more than any San Diego shop publishes. The shop is in Placentia, about 100 miles north, and we install on site.
- Metal Fabrication
- Structural Steel
- Custom Fabrication
- Access & Safety Systems
- Silos & Hoppers
- Laser Cutting
Head to head
How We Stack Up Against the Competition
We lead on all 4 measures
San Diego figures are laser figures read from each shop’s own website on 22 November 2026; both shops also run waterjets. Ours are from our founder, Sean Michael, 15 October 2026.
| Laser power | 20 kWWe leadICD Waterjet & Laser: 8 kWThunderbird Products: 4 kW |
|---|---|
| Thickest steel on the laser | 1½ inWe leadThunderbird Products: Up to ¾ inICD Waterjet & Laser: not published |
| Laser table | 74 in × 168 inWe leadICD Waterjet & Laser: 60 in × 120 inThunderbird Products: 60 in × 120 in |
| Tube laser | ¾ in round to 14 in square, 40 ft infeedWe leadNeither lists a tube laser: sheet only |
| Cutting turnaround | Same day, or one to two days |
| Installation | Throughout Southern California, CSLB 1054898 |
| Shop | 761 Monroe Way, Placentia, about 100 miles north of San Diego |
What we cover
- Custom handrails and guardrails in stainless, aluminum and steel
- Cable railing and ornamental railing
- Steel, stainless and aluminum stairs, fabricated and installed
- San Diego, Chula Vista, National City and La Mesa
- El Cajon, Santee, Poway and Escondido
- Oceanside, Carlsbad, Vista, San Marcos and Encinitas

More laser than any San Diego shop publishes
Two shops in San Diego County publish what their lasers can do. One lists an 8 kW fiber laser on a 60 by 120 inch table. The other lists a 4 kW fiber laser that cuts steel up to ¾ inch. Neither lists a tube laser.
Ours is a 20 kW sheet laser on a 74 by 168 inch table, cutting carbon steel, stainless and aluminum up to 1½ inches thick, to a tolerance of ±0.005 inch. Next to it is a tube laser with a bevel head that takes round tube from ¾ inch up to 14 inch square sections, beams, channel and angle, on a 40 foot infeed. Plate and profiles that other shops send to a plasma table or a waterjet, we cut on the laser, clean and ready to weld.

Why people in San Diego send work 100 miles north
We will say it plainly: the shop is in Placentia, in Orange County, roughly two hours up the 5. People in San Diego County call us when the job is past what a nearby shop is set up for.
That is heavy plate and long structural sections for commercial and industrial construction, and it is high-end residential work too: stainless and aluminum railing that has to look right, a stair that has to fit its opening first time, steel for a custom home. One shop cuts it, welds it, polishes it and installs it.

Handrails, railings and stairs
Railing is a specialty here, not a sideline. We build large quantities of stainless and aluminum railing every year, along with carbon steel, galvanized, bronze and copper, from basic cable rail to polished stainless handrail. Stairs run from galvanized industrial access to a feature staircase in the middle of a building.
We install as well as fabricate, throughout Southern California. That matters more at a distance, not less: the people who measured the opening are the people who have to make the rail or the stair fit it.

One site visit instead of four
Distance is only a problem when a job needs repeated trips. Field measuring by tape used to mean three or four visits before the dimensions were settled. We scan the site with a Trimble X9 3D LiDAR scanner instead. A scan takes as little as 20 minutes, or a full day on a large structure, and the detailer works from an accurate 3D model of the space as it was actually built.
The first stair we scanned, forty feet of it, was installed within 0.03 inches of where it was meant to be. For a site in El Cajon or Oceanside that means one visit to measure and one to install.
Laser cutting for San Diego shops and contractors
Cut parts do not need us on site at all. Send a drawing or a model and we program it in house in SolidWorks, which is why turnaround on cutting is same day, or one to two days.
Fabricators, contractors and builders across the county use us for the parts their own machines cannot take: thick plate, long runs in one piece, bevelled and weld-prepped tube. Check our numbers against whoever is cutting for you now, then send us the drawing.
Before you call
Questions we get asked
Not answered here? The fastest route is a phone call to the shop.

Got a drawing? Talk to the shop.
Call and we will talk it through, or send the scope and drawing set and we will get back to you with pricing and a schedule.
