Skip to Content
Structural steel erection in progress on a commercial site.

Floor space you already own

Steel Mezzanine Fabrication

South Coast Iron fabricates and installs structural steel mezzanines from Placentia, California. We scan the existing building with a Trimble X9 before detailing, and supply the stairs, guardrail, decking and access as one package rather than as four suppliers.

  • Metal Fabrication
  • Structural Steel
  • Custom Fabrication
  • Access & Safety Systems
  • Silos & Hoppers
  • Laser Cutting

At a glance

Specifications

StructureLight to medium weight structural steel
DeckingBar grating, checker plate, composite
AccessStairs, ships ladders, fixed ladders
SafetyOSHA guardrail, toe board, self closing and pallet gates
Field measurementTrimble X9 LiDAR scanning
LicensesCSLB 1054898, LA City FB03230

What we cover

  • Structural steel frame, columns and beams
  • Bar grating, checker plate or composite decking
  • Stairs, ships ladders and access
  • OSHA guardrail, toe board and self closing gates
  • Pallet gates and loading edges
A steel beam lifted into position during erection.

The building is never what the drawings say

A mezzanine goes into a building that already exists, and existing buildings have settled, been modified and been repaired. Columns are not quite where the original drawings put them. Slabs are not quite level. Clear heights vary across a bay.

Detailing a mezzanine from as built drawings and hoping is how a steel package arrives and does not fit. We scan the space with a Trimble X9, usually in well under a day, and detail from the point cloud. On our first scanned job a forty foot stair landed within 0.03 inches of its intended position, and that accuracy is exactly what a mezzanine needs.

A steel plate girder with a drilled bolt pattern along its flange.

One package beats four suppliers

A mezzanine is not just the frame. It is the frame, the decking, the stair, the guardrail, the toe board, the gate at the loading edge and the handrail. Bought separately, the interfaces between them become your problem, and interfaces are where schedules go wrong.

We fabricate all of it. The stair is detailed against the frame it bolts to, the guardrail suits the decking it sits on, and one crew installs the lot.

A fabricated plate girder with its bolt holes drilled and ready.

Tell us the load and the use

A storage mezzanine, an equipment platform and an office mezzanine carry very different loads and are governed differently. The cost difference between them is significant, and specifying the heaviest case by default is a common and expensive habit.

Tell us what will actually be up there, including whether anything is wheeled or lifted onto it, and we will size it properly.

Before you call

Questions we get asked

Not answered here? The fastest route is a phone call to the shop.

Got a drawing? Talk to the shop.

Call and we will talk it through, or send the scope and drawing set and we will get back to you with pricing and a schedule.